Retro-King Amps 45 Watt Combo Bluesbreaker

Retro-King Amps 45 Watt Combo BluesbreakerRetro-King’s 45 watt combo is based on the famous Bluesbreaker 2x12 combo that was built during the 1960s.  This amp isn’t a reissue—it’s more like a replica.  It is all hand wired point-to-point on a vintage style turret board, unlike the reissued version of the Bluesbreaker, and it is built exactly like the original.  It uses a double 32mf cap for filtering in the first cap and a double 16mf cap in the second, just like the original, and it uses an output transformer with a 6.6k primary plate load, which is perfect or the KT66 power tubes this combo uses. When it comes to great plexi tone and sound this amp delivers..

The 45 Watt Combo features two channels, a normal and a high treble.  It has four inputs, a high and a low for each channel.  Two volume, treble, bass, mid, and presence controls let you adjust exactly how your music sounds.  Under the hood you’ll find two matched KT66 power tubes and 3 JJ 12AXY preamp tubes.  The amp also uses a GZ34 rectifier tube.  You can select between 4, 8, and 16 ohm modes.  The amp is housed in a Baltic birch cabinet.  The combo is priced at $1,895 while the head retails for $1,645.

For more info be sure to check out the Retro-King website:

Video Demo of the Retro-King Amps 45 Watt Combo Bluesbreaker


July 26, 2011
Posted in Retro-King Amplification — anthony @ 8:12 pm

Divided by 13 SJT 10/20

The Divided by 13 SJT 10/210 head is similar to the FTR 37, another popular Divided by 13 amp.  However, it’s slightly modified, has less wattage and a few exclusive features that make it of definite interest.  It runs in either a 10 watt Hard Class A mode or a 20 watt Class AB1/A mode, depending on your preference.  You can get a great 50’s style Tweed sound from 10 watt mode, which some players really love.  The SJT 10/20 can access both channels via its two input jacks.  In addition to these channels, you also have a dampening/flattening switch and a mid/gain boost.  The SJT 10/20 head is quite versatile and is a great way of filling that 10/20 watt slot in your amp arsenal.

The first channel on this head features volume, treble, bass, and reverb.  Channel 2 has its own volume control.  The SJT 10/20 uses 12AX7 tubes for its preamp section and four 6V6GT tubes in the power section.  For its rectifier tube, the SJT 10/20 uses either a 5AR4 or a GZ34.  The head weighs 32 pounds, while the combo is 50 pounds.  Both are suitable for taking to gigs or for using in the studio.  The SJT 10/20 head retails for $2,300.

For more info be sure to check out the Divided by 13 website:

Here's a quick little taste of the Divided by 13 SJT 10/20

July 13, 2011
Posted in Divided By 13 — anthony @ 8:55 pm

Blackjack 21-II Amp

The Blackjack 21 was one of Fuchs best amps, but they weren’t completely happy with it.  After some tweaks they upgraded the Blackjack 21 into the Blackjack 21-II, which was made available this year. 

The Blackjack 21-II is a class AB amp that has two channels.  Channel one features eq controls for low, mid, and high, a gain boost, and digital reverb.  The reverb was modeled after the Good Verbrations reverb pedal and has its own level and decay controls. Check the demo video below for the sweetness of the reverb. The second channel has output and master volume controls.  It also shares low, mid, high, and gain controls with channel one.  The amp has a decent amount of clean headroom, though it definitely can go balls to the wall dirty too.  The Blackjack 21-II sounds similar to other Fusch amps like the Train-45 and the Lucky 7, so you know it’s really great for all varieties of classic rock and harder styles. These amps are voiced to emulate classic vintage Marshall or Trainwreck style amps. However, this amp has a lot subtlety too, and you can get some rich bluesy tones out of it.

The preamp stage of the Blackjack 21-II uses two 12AX7 tubes, while the output is provided by two 6V6 power tubes.  The amp can product 4 or 8 ohm outputs.  The head retails for $1,230, while the 1x12 combo is $1,750.

For more info be sure to check out the Fuchs website:

Here's owner Andy Fuch's giving the Blackjack 21 and test drive


July 11, 2011
Posted in Fuchs Amps — anthony @ 11:21 pm

Fender Custom Shop Vibro-King Custom Amp

While we've been covering a lot of the smaller boutique makers in the news these days, you can't overlook the Fender Custom Shop when it comes to vintage tone. Their Vibro-King Custom amp features everything you’d expect from a great boutique amp: point to point wiring, all tube power, and some great tone features. This 60 watt amp is something like a 1963 Reverb unit merged with a ’59 Bassman with some Vibrato and a custom speaker array thrown in. It’s very versatile and responsive, too. Pair it up with a Strat for some awesome clean to crunchy blues tones or with a Les Paul for something more edgy and meaty - like a Peter Green style sound or something in the vein of early Clapton.

The Vibro-King only has one channel, but that’s about all it needs. It has controls for speed and intensity on the vibrato, volume, and controls for the vintage tube reverb function (mix, tone, and dwell). Plus there’s a fat switch to change up your sound a bit. Three Jensen ten inch speakers with Alnico magnets bring the sound.

The Vibro-King features fix 12AX7A tubes in its pre-amp section and two 6L6 GE tubes for power. It also has a 6V6-GTA reverb driver tube. This is one of the heavier amps, weighing in at 72 pounds, so it may not be the best amp to take out to local gigs. It’s also fairly large. However, for pure power and full, rich sound, the Vibro King definitely delivers.

Let us know what you think by leaving a comment below:

Here are a couple demos of the Vibro King Custom


July 5, 2011
Posted in Fender Custom Shop — anthony @ 10:01 pm

Gear Reviews

Daily Gear Alert

Enter your email address:

Delivered by FeedBurner

We respect your privacy and will never share your information with any third party