The Mini II is one of Bad Cat Amps’ most popular products. This tiny little amp may only put out five watts of power, but don’t let that fool you this bad boy really roars. It’s the perfect amp for anyone who needs a low-volume amp in their studio for recording. It’s not going to do very well in large venues, of course, but for home play and recording, the Bad Cat Mini II is perfect. It’s a Class A amp that is point to point wired and all tube powered.
The Mini II uses two 12AX7 pre-amp tubes and a single EL-84 tube for power. This is a great practice amp for folks in the city with limited space as it sounds great at a low volume. The amp features volume, bass, treble, and a master control, plus you can select between four, eight, and sixteen Ohm. The amp weighs about 30 pounds.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
D2F Padded Covers are "Designed 2 Fit" specific models of vintage and current model guitar amplifiers, bass amplifiers, and speaker cabinets. Each are handcrafted in the USA using a custom made 600x600 denier polyester exterior bonded to a 1/4 inch foam padding with a soft brushed nylon tricot interior. These covers are designed to protect your equipment from dust, moisture, minor bumps and normal wear and tear. They are rugged, attractive and aesthetically pleasing as well.
January 21, 2010
Posted in Bad Cat Amps — anthony @ 5:47 pm
This tiny little amp may only put out five watts of power, but don’t let that fool you this bad boy really roars. It’s the perfect amp for anyone who needs a low-volume amp in their studio for recording. It’s not going to do very well in large venues, of course, but for home play and recording, the Bad Cat Mini II is perfect. It’s a Class A amp that is point to point wired and all tube powered.
