Ibanez is of course known for creating some of the most classic tube screamer pedals, and the Ibanez TS808HW Hand Wired Tube Screamer is yet another. The TS808HW is similar to Ibanez’s original tube screamer, but it’s all point to point hand wired on two turret boards. It’s a perfect recreation of the TS808 boutique pedal, so if you missed out on that classic, here's a perfect way to capture that sound. However, the TS808HW is being produced in limited quantities, however, so don’t waste time—if you want one, snatch it up now!
While the TS808HW looks like a HiWatt pedal on the inside, it sounds like nothing but a tube screamer. It has a very rich, warm tone to it that is complimented with some real harmonics. The pedal is very touch sensitive, too. Inside the screamer is all Mogami cable, top of the line cable that creates the easiest and quickest electron path possible. There’s no tube screamer that’s as incredible as the Ibanez TS808 HW Hand Wired Tube Screamer. This limited run pedal costs $349, but again, quantities are limited, so grab one today if you don’t want to miss out.
Additional Resources For Ibanez TS808HW Tube Screamer
Source Yahoo Answers
Question: What, is the difference between a vintage TS808, the TS808 reissue, and the rare TS808HW hand wired?
Answer: The chip is all the difference. The original TS808 is the hardest to find and worth the most. Hand wired is a simple as it says. I have the maxon and love it. Check it out. Original Post Here:
It's back! And it's the real thing: same factory, same components, same housing, same famous seasick green paint. Most important, the same great warm overdrive that made the originals famous. Plug in and crank it up. You'll hear what all the fuss is about.
The Ibanez TS808 Vintage Tube Screamer Reissue is back. This is the incomparable overdrive pedal that vintage gear hounds are always hoping to find. The 2004 TS808 reissue features the same famous square footswitch and the warm tones of the JRC4558 chip used in most of the original TS808s. Ignore look-alikes. If your tone is suffering from a lack of real warmth, the TS808 is the real, nongeneric prescription.
The world's favorite overdrive - improved! Warmth, sustain, and killer tone. That's what the original Tube Screamer delivered. This new version does the same, but adds an '80s rock vibe and '90s flexibility. Besides the original TS9 tone, it offers 3 unique new settings for adding low-end crunch.
Originally released in 1979, the Maxon OD808 was one of the first tube-amp overdrive simulators to hit the market. Its smooth, creamy crunch tone caught on quickly, and helped to launch a long line of predecessors as well as imitators. Today, the OD808 design is without a doubt the most used, most imitated and most lauded overdrive circuit of all time. The reason for this is simple - tone - the OD808 provides the natural, mild overdrive of a tube amp without sacrificing your guitar's original tone. In addition, it can be used as a clean booster to provide increased gain without compromising the sound of your amplifier. The secret behind the legendary "808 tone" lies in the amplifier section of its circuit. Rather than having an amplifier stage followed by a clipping stage, the Maxon OD808 uses a signal-distorting diode (Panasonic #MA150) that is located in the amplifier stage's negative feedback loop (which also contains the JRC4558 IC chip). Therefore, the Maxon OD808 distorts signal in the amplifier circuit itself which yields a smoother, milder, more natural sounding distortion than a separate clipping stage. This is also the reason that the IC type used in the circuit has such a large impact on the unit's tone. It should be noted that the Reissue Series OD808 uses different output resistors than the original version. After the unit's initial release it was discovered to have a high susceptibility to noise due to static electricity buildup. To improve performance, the positions of the output resistors on the reissue OD808 were reversed and their values increased in order to reduce noise levels. This circuit change has no audible affect on the sound of the unit, save for reducing the noise levels. Whether it's used as an overdrive or a booster, the Maxon OD808 is the closest you can get to the classic sounds of 1970's rock guitar in a compact effect pedal.
The Ibanez Tube Screamer, in its many versions and forms, can be found on pedal boards across the globe. Its warm overdrive is a sound many players, from advanced to beginner, can't be without. The hand-wired deluxe TS808HW Tube Screamer offers even more capability and was built with the pro musician in mind. Encased in a special, heavy-duty metal box, the TS808HW pedal is hand-wired with select JRC4558D IC chips (same as the revered and often-imitated TS808) and uses Japanese high-end MOGAMI OEC cable (AWG21). Equipped with true bypass, this Tube Screamer sends pure guitar excitement to your amplifier with no tonal loss whatsoever. This is, by far, the most evolved Tube Screamer pedal Ibanez has ever created.
Unlock the true tonal richness of your reissue TS-808 with a few simpe mods from Fromel Electronics. Control those tubby mids, increase your treble and bass response, and discover the hearty amount of gain that this pedal has to offer! This is not called the supreme mod kit for nothing. Included are detailed instructions, including photos, and all the parts you need. This Supreme mod kit takes things one step further than every other kit out there and replaces virtually every cap in your signal path with high quality Film and Mica caps.
If you have basic soldering skills and can follow directions this is an easy project that can be completed in about 1/2 hour. Don't pay hundreds of dollars for a Boutique overdrive when you can upgrade your TS-808 for $19.95.
WARNING: Performing this mod will void any warranty your pedal may have.
This is a kit to modify your pedal and there is not a pedal included in this auction.
Required Tools/supplies
* YOUR Tube Screamer Pedal
* Soldering Iron
* Solder
* De-soldering braid and or solder sucker
* Phillips head screwdriver
* Wire Clippers
Note to International customers: Due to customs your shipment may take in excess of 4 weeks.